CF1200 Factory Counterflow Towers(Cross-Fluted Film Fill)
CF1200 has been designed for use in factory-assembled counterflow towers in HVAC and light industrial applications. It can also be used as a distribution pad in 3.9” (100 mm) and 5.9” (150 mm) depths where the water contains very low levels of total suspended solids.
CF1200 OVERVIEW
These design features enable ThermaCross to perform up to 13% better than standard 19mm-spaced products, even matching the performance of 12mm-spaced high efficiency fills at higher fill heights.
CF1200 splits the water stream ten times in an 11.8-inch (300 mm) vertical path, balancing high thermal performance and low pressure drop.
BENEFITS
- Available in material meeting Cooling Technology Institute (CTI) Standard 136
- Available with AccuShield technology
- Available with Mechanical Assembly technology
ThermaCross Film Fill Features
Highly Efficient
Cross-fluted fills offer the highest level of efficiency of all film fill designs, improving heat transfer and maximizing overall tower performance.
Improved Water Distribution
The engineered microstructure incorporated into cross-fluted fills enhances water distribution and thermal mixing.
Dedicated Bond Points
Brentwood’s cross-fluted fills feature bonded edges for added media strength and durability.
Mechanical Assembly
Brentwood’s Mechanical Assembly technology has been improved for the production of ThermaCross, yielding connections that are 50% stronger than glued.
Film Fill Specifications
| PRODUCTS | SURFACE AREA ft2/ft3 |
SHEET SPACING inches |
FLUTE ANGLE degrees (˚) |
SHEETS PER FT | PACK SIZES Minimum D/W/L inches |
PACK SIZES Maximum D/W/L inches |
PACK SIZES Standard D/W/L inches |
NOMINAL GAUGE mils |
DRY WEIGHT lbs/ft3 |
|---|---|---|---|---|---|---|---|---|---|
| CF1200 | 69 | 0.46 | 30 | 26 | D: 3.9 W: 6 L: 12 |
D: 11.8 W: 12 L: 120 |
D: 11.8 W: 12 L: 48, 72, 96, 120 |
8 or 10 | 2.4 or 2.8 |
CF1900-Cross-Fluted Film Fill
Spanish